Technical data

Vehicle care 335
2405075
10. Inflate the tyre to the
recommended inflation pressure
using the pressure gauge (1).
The recommended inflation
pressure can be found on the
Tyre and Loading Information
label.
The pressure gauge (1) may read
higher than the actual tyre
pressure while the compressor is
on. Turn the compressor off to
get an accurate reading. The
compressor may be turned on/ off
until the correct pressure is
reached.
If you inflate the tyre higher than
the recommended pressure you
can adjust the excess pressure
by pressing the pressure
deflation button (4) until the
proper pressure reading is
reached.
This option is only functional
when using the air only hose (6).
11. Press the on/off button (4) to turn
the tyre sealant and compressor
kit off.
Be careful while handling the tyre
sealant and compressor kit as it
could be warm after usage.
12. Unplug the power plug (8) from
the accessory power outlet in the
vehicle.
13. Disconnect the air only hose (6)
from the tyre valve stem, by
turning it counterclockwise, and
replace the tyre valve stem cap.
14. Replace the air only hose (6) and
the power plug (8) back in its
original location.
15. Place the equipment in the
original storage location in the
vehicle.