Technical data

336 Vehicle care
2394131
The tyre sealant and compressor kit
has an accessory adapter located in
a compartment on the bottom of its
housing that may be used to inflate
air mattresses, balls, etc.
Removal and installation of the
sealant canister
To remove the sealant canister:
2396425
1. Unwrap both hoses.
2. Slide the canister away from the
compressor housing.
3. Unscrew the hose connected to
the canister.
4. Replace with a new canister
which is available from your
dealer.
5. Attach the hose to the canister
and tighten.
6. Slide the new canister into place.
Make sure it sits in the
compressor housing socket.
7. Replace both hoses to their
original location.