Technical data

Vehicle care 339
2038889
6. Place the jack vertically at the
front or the rear jacking notch
next to the wheel you plan to
change.
C11E5009A
7. Raise vehicle by rotating wheel
wrench or jack handle clockwise
until lifting head fits firmly into
appropriate notch and tyre is off
the ground about 1 inch (2.5 cm).
Note
Do not raise vehicle more than is
necessary to change wheel.
8. Remove wheel nuts completely
by turning counterclockwise.
9. Remove tyre and wheel.
10. Mount spare tyre on the wheel
hub.
Caution
Do not attempt to raise vehicle until
the jack is in the proper position,
and secure both to the vehicle and
the ground.
Caution
As the jack begins to raise the
vehicle, make sure jack is properly
placed so it will not slip.
{Warning
Never get under car or start or run
the engine while car is supported
by a jack.
Vehicle may slip off the jack
resulting in serious injury or death.