Technical data

Vehicle care 343
Before jump starting
1. Apply parking brake.
2. For a vehicle with automatic
transaxle, shift to PARK, and for
manual transaxle, shift to
NEUTRAL.
3. Switch off all electrical
accessories.
Attaching jumper cables
To jump start your vehicle, connect
the jumper cables in the following
order:
JE85A
1. Connect one end of the first
jumper cable to the positive
terminal of the battery providing
the jump start (identified by "+"
sign on the battery case or
terminal).
2. Connect the other end of this
same jumper cable to the positive
terminal of the discharged battery
("+" sign).
3. Connect the first end of the other
jumper cable to the negative
terminal of the battery providing
the jump start (identified by "-"
sign on the battery case or
terminal).
Caution
Turn audio system off before jump
starting your vehicle. Otherwise
you may damage audio system.
{Warning
Always route jumper cables so
they cannot catch on rotating parts
in the engine compartment.
Otherwise you may damage
vehicle and cause serious injury.