Technical data

Service and maintenance 361
Use of substitute engine oils if dexos
is unavailable: In the event that
dexos approved engine oil is not
available at an oil change or for
maintaining proper oil level, you may
use substitute engine oil of the
qualities mentioned above. Use of
oils that do not meet the dexos
specification, however, may result in
reduced performance under certain
circumstances.
Topping up Engine Oil
Engine Oils of different
manufacturers and brands can be
mixed as long as they comply with
the required Engine Oil (Quality and
Viscosity).
If Engine Oil of the required Quality is
not available, a maximum of 1 Litre
ACEA A3/B3(Gasoline) ACEA A3/B4
or ACEA C3(Diesel) may be used
(only once between each oil
change).
The Viscosity should be of the
correct rating.
Use of Engine Oil with only ACEA
A1/B1 or only ACEA A5/B5 Quality is
prohibited, as it can cause long term
engine damage under certain
operating conditions.
Engine Oil Additives
The use of supplemental Engine Oil
Additives could cause damage and
invalidate the warranty.
Engine Oil Viscosity Grades
The SAE Viscosity Grade gives
information of the thickness of the
Oil.
Multigrade Oil is indicated by two
figures:
The first figure, followed by a W,
indicates the low temperature
Viscosity and the second figure
indicates the high temperature
Viscosity.
TEL119A
SAE 5W-30 is the best Viscosity
Grade for your vehicle. Do not use
other Viscosity Grade Oils such as
SAE 10W-30, 10W-40 or 20W-50.