MSDS

_____________________________________________________________________
Revision Number: %%revision_number%%
Revision Date: March 10, 2006
4 of 8
Chevron TECHRON® Concentrate
PLUS
MSDS : 14397
and other substances in the work place when designing engineering controls and selecting personal
protective equipment. If engineering controls or work practices are not adequate to prevent exposure to
harmful levels of this material, the personal protective equipment listed below is recommended. The
user should read and understand all instructions and limitations supplied with the equipment since
protection is usually provided for a limited time or under certain circumstances.
ENGINEERING CONTROLS:
Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels
below the recommended exposure limits.
PERSONAL PROTECTIVE EQUIPMENT
Eye/Face Protection: No special eye protection is normally required. Where splashing is possible, wear
safety glasses with side shields as a good safety practice.
Skin Protection: Wear protective clothing to prevent skin contact. Selection of protective clothing may
include gloves, apron, boots, and complete facial protection depending on operations conducted.
Suggested materials for protective gloves include: Chlorinated Polyethylene (or Chlorosulfonated
Polyethylene), Nitrile Rubber, Polyurethane, Viton.
Respiratory Protection: Determine if airborne concentrations are below the recommended occupational
exposure limits for jurisdiction of use. If airborne concentrations are above the acceptable limits, wear an
approved respirator that provides adequate protection from this material, such as: Air-Purifying
Respirator for Organic Vapors.
Use a positive pressure air-supplying respirator in circumstances where air-purifying respirators may not
provide adequate protection.
SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES
Attention: the data below are typical values and do not constitute a specification.
Color: Colorless to yellow
Physical State: Liquid
Odor: Petroleum odor
pH: Not Applicable
Vapor Pressure: 0.1 psia (Min) @ 37.8 °C (100 °F)
Vapor Density (Air = 1): No data available
Boiling Point: 148.9°C (300°F)
Solubility: Soluble in hydrocarbons; insoluble in water
Freezing Point: Not Applicable
Melting Point: Not Applicable
Specific Gravity: 0.88 @ 15.6°C (60.1°F) / 15.6°C (60.1°F)
Volatile Organic
Compounds (VOC) : 66.9 %weight (Typical)
Viscosity: 9 cSt @ 40°C (104°F) (Min)
SECTION 10 STABILITY AND REACTIVITY
Chemical Stability: This material is considered stable under normal ambient and anticipated storage
and handling conditions of temperature and pressure.
Conditions to Avoid: Do not exceed handling and storage temperatures listed in MSDS Section 7
(Handling and Storage).
Incompatibility With Other Materials: May react with strong acids or strong oxidizing agents, such as
chlorates, nitrates, peroxides, etc.
Hazardous Decomposition Products: None known (None expected)
Hazardous Polymerization: Hazardous polymerization will not occur.