User's Manual

The Main Menu
Phone setup
70
Changing phone code
1. In standby mode, press Menu.
2. Scroll to Phone setup and press Select.
3. Scroll to Security and press Select.
4. Scroll to Change code and press Select.
5. Scroll to Phone code and press Select.
6. Enter the old Phone code and press OK.
7. Enter the new Phone code and press OK.
8. Enter the new Phone code again and press OK.
Changing SIM lock code
1. In standby mode, press Menu.
2. Scroll to Phone setup and press Select.
3. Scroll to Security and press Select.
4. Scroll to Change code and press Select.
5. Scroll to SIM lock and press Select.
6. Enter the old SIM lock code and press OK.
7. Enter the new SIM lock code and press OK.
8. Enter the new SIM lock code again and press OK.
Closed user group
Closed user group is an operator dependent function. If you have subscribed
this feature, you can specify the group of people who can call you and receive
your call.
To activate closed user group:
1. In standby mode, press Menu.
2. Scroll to Phone setup and press Select.
3. Scroll to Security and press Select.
4. Scroll to Closed user group and press Select.
5. Scroll to one of the following and press OK.
• Preset: Activate the closed user group function and use preset closed user
group.
• On: Activate the closed user group function and specify a closed user group.
You will be prompted to enter the number of the closed user group. The
number is available from your system operator.
• Off: deactivate the closed user group function.