User's Manual

The Main Menu
WAP Service
86
Configuring WAP profiles
You can configure up to 5 sets of WAP settings. Each set of WAP settings is
called a WAP profile. The WAP profile may have already been programmed
on your SIM card after you subscribe the WAP service to your system so you
can access mobile Internet immediately. Otherwise, you need to configure the
settings manually. Please contact your system operator for details.
Setting up a WAP profile
1. In standby mode, press Menu.
2. Scroll to WAP service and press Select.
3. Scroll to Profiles and press Select.
4. Scroll to a profile and press Select.
5. Scroll to Edit and press Select.
6. According to the parameters supplied by your operator, configure the fol-
lowing:
Homepage: Enter the address of the homepage.
Session mode: Temporary or Permanent.
Connection Security: On or Off.
Data bearer: GSM Data or GPRS.
IP address: Enter the IP address.
Authentication type: Normal or Secure.
Username: Enter the username.
Password: Enter the password.
Before setting up a WAP profile, please be sure to obtain the following parameters from your
operator:
Homepage:
Session mode: Temporary Permanent
Connection security: On Off
Data bearer: GSM Data GPRS
IP address: . . .
Authentication type: Normal Secure
Username:
Password:
Information you need in case you have to set up a WAP profile manually