User's Manual Part 2

The Main Menu
Call Meter
49
2. Scroll to Call meter and press Select.
3. Scroll to Call Cost and press Select.
4. Scroll to Last call or All calls and press Select.
Clearing call cost
1. In standby mode, press the left soft key.
2. Scroll to Call meter and press Select.
3. Scroll to Call Cost and press Select.
4. Scroll to Clear cost and press Select.
5. Enter your PIN2 code and press OK.
Viewing remaining call cost credit
Call cost credit is used to limit the cost of your call. If your call cost exceeds
such credit, you will not be able to make phone calls. However, you can still
make emergency calls.
1. In standby mode, press the left soft key.
2. Scroll to Call meter and press Select.
3. Scroll to Call Cost and press Select.
4. Scroll to Credit remaining and press Select.
Configuring call cost settings
Before you can obtain call cost information, you need to configure call cost
settings following the steps below:
1. In standby mode, press the left soft key.
2. Scroll to Call meter and press Select.
3. Scroll to Call Cost and press Select.
4. Scroll to Setting and press Select.
5. Scroll to an item and press Select to configure.
• Cost limit: Enter a cost limit. This limit is also your call cost credit.
• Currency: Enter the currency that will be used to calculate your call cost.
• Price unit: Enter the unit of price that will be used to calculate your call cost.
6. When done, press OK.
You will be prompted to enter your PIN2 code when modifying call cost settings.
Note