User's Manual Part 3

The Main Menu

Configuring WAP profiles

You can configure up to 5 sets of WAP settings. Each set of WAP settings is

called a WAP profile. The WAP profile may have already been programmed

on your SIM card after you subscribe the WAP service to your system so you

can access mobile Internet immediately. Otherwise, you need to configure the

settings manually. Please contact your system operator for details.

Setting up a WAP profile

1. In standby mode, press the left soft key.

2. Scroll to WAP service and press Select.

3. Scroll to Profiles and press Select.

4. Scroll to an empty profile and press Select.

5. Scroll to Edit and press Select.

6. According to the parameters supplied by your operator, configure the fol-

lowing:

Homepage: Enter the address of the homepage.

Session mode: Temporary or Permanent.

Connection Security: On or Off.

Data bearer: GSM Data or GPRS. If GSM is selected, you need to setup

the Dial-up number, Data call type and Data call speed. If GPRS is

Before setting up a WAP profile, please be sure to obtain the following parameters from your

operator:

Homepage:

Session mode: Temporary Permanent

Connection security: On Off

Data bearer: GSM Data (Dial-up number, Data call type, Data call speed)

GPRS (GPRS access point )

IP address: . . .

Authentication type: Normal Secure

Username:

Password:

Information you need in case you have to set up a WAP profile manually