Use and Care Manual

10
1. Unplug and allow iron to cool.
2. To empty water from iron, swivel Water Fill Door and slowly
tilt pointed end of iron over a sink until all the water has
poured out.
3. Store iron on the Heel Rest. NOTE: Use the Self-Clean
function following each use of the steam function to keep
the steam vents clear of any mineral buildup. Add water to
the iron. Turn the Temperature Setting Dial to linen (...) and
preheat for 2 minutes. Then, turn the Temperature Setting
Dial to min and unplug. Hold the iron over a sink. Press and
hold the Self-Clean Button until steam no longer comes
from the vents on the soleplate. Allow iron to cool before
storing.
w CAUTION
Eye Hazard. Hold the plug with one hand while
pushing the Cord Retraction Button with your other hand to
retract the cord.
Care and Cleaning
The Self-Clean function cleans the steam holes, but will not
remove residue from the flat surface of the soleplate. To clean
an iron’s soleplate, preheat the iron to the linen setting and
iron over a damp, 100% cotton cloth. This creates heavy
steam that transfers residue from the soleplate to the cloth.
Soleplate Care
NOTES:
• Care should be used while cleaning; steam can burn.
• Never iron over zippers, pins, metal rivets, or snaps since
these may scratch the soleplate.
• Do not use abrasive cleansers or metal scouring pads.