User's Manual

Instruction Manual, LA322 Lever Action, FEB2016 Pag. 11
The rear sight is manually adjustable to shoot higher or lower by moving the rear sight ramp by
one or more notches.
This adjustment will allow the rear sight to be adjusted lower or higher.
It’s possible to adjust the rear sight for windage by following these steps:
loosen the screw on the upper front side of the sight.
Take a non-marking brass, plastic or fiber hammer and gently tap the rear sight base to the left
or to the right according to the direction you wish to move the point of aim. Tighten the screw
again.
Take Down disassembly
Model LA322 can be disassembled in two parts, for easy and convenient carriage.
With the lever completely open, unscrew the large screw (7) placed centrally on the right side of
the receiver but, be careful, don’t unscrew it completely otherwise the inner spacer (57) that is
screwed onto the large screw may fall away.
You are now able to remove the two halves of the rifle.