Operating instructions

7
Challenger Slave
The Challenger Slave is an active ( powered ) speaker unit with built-in
switching power supply as well as rechargeable batteries, complete with
similar charging circuit as that of the Challenger 1000 Master unit.
It is an extended and indispensable member of the Challenger Audio Link
system.
Audio Link Active Bus controls
1.Active bus IN ( 21 )
2.Active bus OUT ( 22 )
3.Slave volume control ( 23 )
Challenger Speaker ( C-SP )
The Challenger Speaker is a passive companion speaker for the
Challenger 1000 series.
It is for connection to the switched or unswitched speaker outs of the
Challenger 1000 ( Master ) or the Challenger Slave units.
Rear panel configuration.
1.Speaker IN ( 24 )
2.Speaker OUT ( 25 )
Mechanical Parts
All the Challenger 1000 ( Master ), Challenger Slave and the
Challenger companion speaker enclosures have the identical
mechanical parts as follow :
Three stages Trolley ( 31 )
Trolley release button ( 32 )
Wheels ( 33 )
Handle ( 34 )
Tripod mount bracket ( 35 )
( not application for Challenger Slave and companion speaker )
Remark : Please be advised that the trolley and wheels are meant for moving around on smooth
surface and short distance only. It is NOT meant or built for heavy duty long distance
transportation or on rough surfaces. Please DO NOT use the trolley as handle for going
up and down the staircase. For going up and down the staircase, please use the Handle ( 34 ).
31
32
34
35
33
Pres
s
14
Hand-held microphone
Battery