Operation Manual

9
DWR-5420/DH-5400/DB-5400 Dual-Channel Three Redundancy Digital Wireless Microphone System
Audio output connection
INDIVIDUAL balanced output
MIXED unbalanced output
XLR connector provides
balanced audio output signal
from this jack to the
mixer/amplifier. Use an audio
output cable with “XLR” or
“Cannon” connector, connect
one end to the balanced
output jack of the receiver,
and the other end to the “MIC
IN” jack of the mixer/
amplifier. (Fig 3)
¼” PHONE PLUG connector provides unbalanced audio
output signal from this jack to the mixer/amplifier. Use an
audio output cable with ¼” PHONE PLUG connectors.
Connect one end from the unbalanced output jack of the
receiver, and the other end to the “LINE IN” or “MIC IN” jack
of the mixer/ amplifier.
Level switch setting
◼
When connecting to the LINE /AUX IN of a mixer/amplifier,
switch to “LINE” position (Fig 4). DO NOT use the “MIC”
position as they may not deliver a sufficient high output
level.
◼
When connecting to the “MIC IN” jack of a mixer/amplifier,
switch to “MIC” position (Fig 5). Overload distortion may
occur at the wrong level position.
INDIVIDUAL output to MIC IN
MIXED output to LINE/AUX IN
MIXED output to MIC IN
Fig 3
Slide LEVEL switch to LINE
LINE/AUX IN
Fig 4
Slide LEVEL switch to MIC
MIC IN
Fig 5
DC IN
12 V
MI XE D OU TMI C O U T 1
1.G
2.
3.
MI C O U T 2 LEV EL
MIC LINE
LEVEL
MIC LINE
DC IN
12 V
MI XE D OU TMI C O U T 1
1.G
2.
3.
MI C O U T 2 LE VEL
MIC LINE
LEVEL
MIC LINE
DC IN
12 V
MI XE D OU TMI C O U T 1
1.G
2.
3.
MI C O U T 2 LE VEL
MIC LINE
Mixer
▼
Amplifier
▼
Amplifier
▼