Operation Manual

18
Instructions
RF power setting
Higher output power can extend the RF transmission distance but has higher power
consumption that results in shorter batteries’ duration.
Lower output power will reduce the RF transmission distance but can extend the batteries’
operating duration with lower power consumption.
1 Use MENU button to go to the RF POWER page.

2 Press and hold SET button until the RF power figure flashes to denote readiness for setting.

3 Press SET (UP) or MENU (DOWN) button to choose an output level from -1 dB to +16 dB.
The default level is +12 dB.

4 6 seconds after selecting an output level, it will be automatically saved and the level will not
change after reboot until the setting is changed again.