Operation Manual

5
DWR-5420/DH-5400/DB-5400 Dual-Channel Three Redundancy Digital Wireless Microphone System
Channel synchronization of the receiver and transmitter
1
Press and hold the transmitter’s synchronization button until “
SYNC
” flashes on the
LCD.

2
Press and hold the receiver’s
SYNC
button until the LCD displays “-Sync-” and the
channel number becomes the same as the transmitter indicative of successful channel
synchronization.

Volume adjustment
1
Press
SET
button to make the volume icon appear and flash.

2
Press DOWN(
▼
) and UP(
▲
) button to adjust the volume by 1dB / step, from -8dB
(min) to +8dB (max). The default volume is 0dB.

3
After a level is chosen, wait about 5 seconds to save the setting and the level will not
change after reboot until the setting is changed again.
SETSYNC
SETSYNC
SET
SYNC