Portable sound system Operation maunal Focus 505 Taiwan Good Design Taiwan Excellence IC: 3563A-FOCUS505 IC: 3563A-SQ5016 IC: 3563A-SM5016 Focus 500
Congratulations and thank you for purchasing this all-in-one compact portable sound system. To ensure a trouble-free operation, please read this manual thoroughly and fully understand its controls and functions. There are various versions of the Focus as below: 1. Focus Passive Speaker.(p.2) 2. Focus Active Speaker.(p.2) 3. Focus with Amplifier.(p.3) 4. Focus with CD / USB Player.(p.3) 5. Focus with CD / USB Player & Digital Recorder.(p.4) 6. Focus with Digital Recorder.(p.
Focus Active Speaker 1. Aux volume 2. Aux input 3. Battery low indicator 4. Charging indicator 5. DC in 6. Fuse 7. Power switch 8. Battery compartment release 1 3 2 4 5 6 7 8 8 Focus Passive Speaker 1. Audio input 2.
Focus (Amplifier version) 1. Mic volume control 2. Aux volume control 3. Wireless mic 1 4. Wireless mic 2 5. Bass control 6. Treble control 7. Voice priority 8. Mic input 9. Aux input 10. Aux output 11. External speaker 12. WR1 channel selector 13. WR2 channel selector 14. Battery low indicator 15. Charging indicator 16. DC in 17. Fuse 18. Power switch 19. Battery compartment release 1 2 3 4 5 6 14 7 8 9 10 11 12 13 15 16 17 18 19 19 Focus (CD / USB Player version) 1. LCD Display 2. Play/Pause 3.
Focus (CD / USB Player & Digital Recorder version) 1. Play/Pause 2. Stop 3. SD/USB selector 4. Track number button "1" 5. Track number button "10" 6. Track number button "100" 7. A→B play section 8. Program/Repeat 9. Forward 10. Reverse 11. Folder selector 12. Volume control 13. USB 2.0 input 14. SD card input 15. Copy 16. Record 17. Infrared detector 18. Power on/off 19. Delete 20.
Operating procedures After unpacking the unit for the first time, please charge the unit for about 4~5 hours before any operation. This is absolutely necessary as the built-in rechargeable battery might have been discharged naturally due to long shipment and storage time, even though it has been fully charged in the factory prior to shipment. To charge the battery, just plug in the DC end of the switch mode power supply into the DC IN of the unit and charging will start automatically.
Operation of system with Digital Recorder. This operation is valid for version of Focus with built-in “Digital Recorder “. To operate, first turn on the Master power switch and then press the designated power button of this module. The LCD display will be lighted up and Volume setting can be done by rotating the knob. For Bass and Treble setting, adjust the designated controls respectively. For more details, please refer to the explanation of “Digital Recorder “controls and functions.
Operating the CD / USB Player To begin operation switch on the CD Power after the main power of Focus has been turned on. Keys PLAY/PAUSE Functions When this key is pushed during CD stop, play will start after track search. When this key is pushed during CD is playing, it will be changed to pause. When this key is pushed during CD is pausing, it will be changed to play. STOP When CD is not stop, if this key is pushed then CD will stop. CD When press this key will change to cd-mp3 mode.
FOLDER-DOWN PLAY MODE EJECT PROG MUTE POWER ESP FIND 0~10 VOL.VOL.+ In stop mode: Skip the starting play folder to previous folder during stop mode, cyclic to the last folder if it is in the first folder. In program entry mode: Change the file for program select to previous folder’s first file, cyclic to the last folder if it is in the first folder. In normal play mode: Skip the playing file to the previous folder’s first file. In mp3 mode and in USB mode .
Operating the Digital Recorder Player Features - Recording through the Line-in recording directly to a USB or SD Card - Offer USB and SD Card function of each replication. - Recording format is most popular MP3 audio format. - Accept the capacity of 128MB to 16G USB / SD Card / SDHC - With a language learning function, can be broadcast repeatedly at designated areas - Adjustable recording quality, provide choice of 44.1 KHz, 128 Kbps and 192Kbps.
press STOP button to stop recording. Sound recording through the REC function keys are saved in the directory folder REC -To Play REC track in folder: press FOLDER button, LCD display F. Use REV or F. WD button to select the directory REC, press PLAY / II to start playing. -The track number in the REC Folder will start from “ REC 001 “, and increase gradually. Therefore if want to check the recording file after finish record, the song will be recorded at the last track in the REC folder.
being played - Press 3rd times, LCD screen displays "REP ALL", will be repeated play all tracks. - Press 4th times, cancel repeat playback function. The words on LCD screen will be eliminated. Memory function: Need to operate in the stop-play mode, can be memories up to 99 songs - Single or multi-tracks memory: Press the STOP button to stop playback. Press PROG / REPEAT button, LCD screen displays PROGRAM. Select desired songs by using FOLDER button and number keys 0 to 9 and REV key or F. WD key.
- To cancel delete function, just wait for LCD stops flashing and cancellation of delete function LCD Display: ▼ LINE: Line in audio source DEL: When using delete function : In playing mode II: Pausing REP: Repeatedly playing the single track REP ALL: Repeat all tracks REP F: Repeat specific folder RAN: Playback in random order PROG: When operate to program tracks.
button to select the directory REC, press PLAY / II to start playing. - The track number in the REC Folder will start from “ REC 001 “, and increase gradually. Therefore if want to check the recording file after finish record, the song will be recorded at the last track in the REC folder. COPY: Copy function key. It has to operate copy function in STOP status when use this key for USB Copy to SD or SD Copy to USB.
tracks stored in the Program. - Whole folder memory: Press the STOP function keys to stop playback Press PROG / REPEAT button, LCD screen display shows PROG, press the FOLDER button with the number of combination of keys or REV keys F. WD button to select the folder Press PROG to store selected folder. To store more folders, repeat above steps. Press PLAY / II button to start play memorized folders.
UHF/VHF handheld microphone (Q-1005/Q-815/SQ-1016/SQ-5016) Parts and functions 1 2 3 4 5 ▲ Q-1005 (VHF fixed freq.) 1 2 3 4 5 Q-815 ▲ 6 (UHF fixed freq.) 1 2 3 4 5 6 ▲ SQ-1016 7 (UHF 16 freq.) 1 2 3 4 5 6 10 7 11 8 9 ▲ SQ-5016 (UHF LCD 16 freq.
Battery installation This microphone requires 2 AA-size batteries to operate. Please insert the batteries according to the correct polarity. Many batteries are known to have leakage problem of conductive and corrosive liquid. Please observe the rule to remove the batteries if they are not to be used for a longer period. Channel setting (SQ-1016) Use the attached small screw driver to set the channel and the channel number will show on the window above it. Other settings(SQ-5016) 1.
UHF/VHF beltpack transmitter (M-1005/M-815/SM-1016/SM-5016) Parts and functions 1 2 3 4 1 2 3 4 2 3 6 5 M-1005 ▲ (VHF fixed freq.) 7 6 11 14 15 8 5 5 6 4 12 13 10 M-815 ▲ 9 SM-5016 ▲ (UHF fixed freq.) (UHF LCD 16 freq.) SM-1016 ▲ (UHF 16 freq.
Battery installation This microphone requires 2 AA-size batteries to operate. Please insert the batteries according to the correct polarity. Many batteries are known to have leakage problem of conductive and corrosive liquid. Please observe the rule to remove the batteries if they are not to be used for a longer period. Channel setting (SM-1016) and sensitivity setting Use the attached small screw driver to set the channel and the channel number will show on the window above it.
Infrared handheld microphone (IWH-201/IWH-301) Parts and functions 1 2 3 4 5 7 6 1. Grille cover. 2. Status LED: Bicolor LED will glow when switch is put to ON. Green : Battery is full and microphone is in normal mode. Red : Battery is weak and will shut off soon. Please charge the battery. 3. Power switch. Slide to turn microphone on or off. 4. Battery compartment. 5. Infrared emitter with charging contacts. IR ray radiates from here. Do not block or hold this part of the body. 6.
Infrared handheld/pendant microphone (IWH-401) Parts and functions 1 2 3 4 5 8 9 7 6 1. Cartridge screen. 2. Infrared emitter. IR ray radiates from here. Do not block or hold this part of the body. 3. Anti-rolling color ring. 4. Status LED: Bicolor LED will glow when switch is put to ON : Green : Battery is full and microphone is in normal mode. Red : Battery is weak and will shut off soon. Please charge the battery. 5. Power switch Slide to turn microphone on or off. 6.
Infrared beltpack transmitter (IWM-202) Parts and functions 1. Battery compartment 2. Power high/low switch 3. A-B channel selector 4. Lavalier or headset microphone input 5. Power on/off 6. Power indicator 7. Infrared emission source 8. Volume control 4 8 6 7 3 2 5 1 Operating procedures 1. Open battery cover and put 2 AA alkaline batteries. 2. Connect with lavalier or headset microphone input. 3. Power the transmitter to make the power indicator turn green.
Infrared beltpack transmitter (IWM-302) Parts and functions 5 1 2 3 4 8 6 10 9 7 1. Volume control 2. Power on / Battery-status indicator 3. Power switch 4. Mini XLR connnector 5. Infrared emitter 6. Cover-release button 7. Charging contacts 8. Transmission-strength selector 9. Channel selector 10. Gain control (MT, low impedance) Making changes to settings in IWM-302 Channel changing First open the cover of IWM-302's battery compartment by pressing its release buttons on both sides.
Infrared pendant transmitter (IWM-402) Parts and functions 5 1 8 2 9 10 peeled off 11 3 4 6 7 AA-sized NiMH battery 1. Mic in (Φ2.5mm). Headset or lavalier microphone is ok. 2. Power switch. 3. Charging port. 4. Charging contact, workable with HC-40 charger. This transmitter has a unique inbuilt safety feature to protect itself from misuse during recharging. It incorporates a special charging function which only operates when the PVC cover of the battery is removed.
Maintenance-free Lead Acid battery Guidelines for maintenance-free Batteries: 1. Battery should operate at temperatures between 15°C ~ 50°C. To ensure a longer life span, it should be kept between 5°C ~ 35°C. For optimum result, 20°C ~ 25°C will be ideal. When temperature falls 15 degrees below zero, battery will undergo some changes in its chemical contents and therefore cannot be recharged.
-25-
-26-
12I1240
