User manual

-16-
Battery installation
This microphone requires 2 AA-size batteries to operate. Please insert the batteries
according to the correct polarity. Many batteries are known to have leakage problem of
conductive and corrosive liquid. Please observe the rule to remove the batteries if they are
not to be used for a longer period.
Channel setting (SQ-1016)
Use the attached small screw driver to set the channel and the channel number will show
on the window above it.
Other settings(SQ-5016)
1. Channel setting
Use UP or DOWN button to go to the CHANNEL/ FREQUENCY page.
The cursor will ash to allow changes to be made. Pressing UP or DOWN button will
increase or decrease the channel number. The corresponding frequency will change
accordingly. When a desired channel is selected, it will be automatically saved and stored
in the memory.
2. Making changes to Battery selection
Use UP or DOWN button to go to the Battery selection page.
Press UP or DOWN button to move the cursor to either NiMH (rechargeable battery) or
AKLN (Alkaline battery) position.
When the desired battery has been selected, it will be automatically saved and stored in
the memory.
Remark : NiMH battery must be selected when rechargeable battery is being used. Never
select AKLN (Alkaline) when microphone is intended for charging as Alkaline battery can
not be charged ! Wrong selection of battery will result in
battery sensing electronics to display wrong and misleading status information.
3. Making changes to Sensitivity Level
Use UP or DOWN button to go to the SENS SET page.
Press UP or DOWN button to increase or decrease the Sensitivity Level of the microphone.
The MAX level is 4 and the MIN level is 1.
When a desired sensitivity level has been selected for your application, it will be
automatically saved and stored in the Memory.
Remark : When selecting Sensitivity level, please bear in mind that Level 1 is for close
proximity singing purposes whereas Level 4 is for use of microphone on tripod mount for
speech purposes. When Level 4 setting is used for close proximity singing, high SPL input
will result in undesirable distortion in the output.
After performing setting changes, you could turn the protective cover 180° in either
direction to block the buttons from being accidentally adjusted.