User manual

-22-

Infrared beltpack transmitter (IWM-302)

Parts and functions

1. Volume control

2. Power on / Battery-status indicator

3. Power switch

4. Mini XLR connnector

5. Infrared emitter

6. Cover-release button

7. Charging contacts

8. Transmission-strength selector

9. Channel selector

10. Gain control (MT, low impedance)

Making changes to settings in IWM-302

Channel changing

First open the cover of IWM-302's battery compartment by pressing its release buttons on

both sides. There are 2 channels for selection, namely "A" and "B", either can be chosen

by switching this selector.

MT adjusting

Low-impedance "MT" gain control is situated inside the battery compartment. It can be

adjusted by using a small screw driver to rotate till a desired audio output level has been

selected.

Battery installation

To install the batteries, rst open the battery compartment by pressing the release buttons

on both sides of the IWM-302. Batteries used are 2 pcs of NiMH type (rechargeable) or

Alkaline type (not rechargeable). When inserting batteries, please place them according to

the correct polarity.

1 32 4

910