User's Manual

5
16) From the "Install From Disk" dialog box, click the "OK" button.
17) Under "Models", select the correct model that matches the pointing
device type and click on the "Next" button.
18) If the "Update Driver Warning" appears, click on the "Yes" button.
19) Click on the "Next" button.
20) Windows should now copy the updated mouse drivers to the system.
21) Click on the "Finish" button.
22) Click on the "Close" button.
23) Windows should now ask you to restart the system for the changes to
take effect, click on "Yes" to restart the system.
Please execute the following steps to perform a drivers-only
installation for Windows 95 and Windows NT 4.0:
1) Click on the "Start" button on the Windows Desktop.
2) Select "Settings", then "Control Panel".
3) From the Control Panel, double click on the "Mouse" icon.
4) Select the "General" tab.
5) From the "General" tab, click on "Change".
6) Insert the Mouse Driver Disk/CD-ROM into the disk drive.
7) Click the "Have Disk" button.
8) When prompted, click the Browse button.
9) Double Click on the drive letter that Mouse Driver Disk resides.
10) Click the "Open" or "OK" button.
11) Click on the "OK" button.
12) Select "Show all Devices"
13) Under "Models", select the correct model that matches the pointing
device type and click on the "OK" button.
14) Windows should now copy the updated mouse drivers to the system.
15) Click on "Close".
16) Windows should now ask you to restart the system for the changes to
take effect, click on "Yes" to restart the system.
Please execute the following steps to perform a drivers-only
installation for Windows 98 and Windows ME:
1) Click on the "Start" button on the Windows Desktop.
2) Select "Settings", then "Control Panel".