User's Manual

Vera Tsai
10/6/2004 5:55 PM
The copy is according to the product information provided by engineers.
DATE PRODUCT CONTENT ART DESIGNER
TOTAL
PAGE VERSION
Sept. 9,
2004
K46-2.4GHz-
smart link
Neutral
User’s Guide
Omar 4 002
4
4) Press again the ID Link Button on the dongle and the LED
indicator will blink. There are 15 seconds for the keypad
linkage.
5) Press the ID Link Button of the keypad.
6) The keyboard and the keypad are linked with the dongle and the
dongle’s LED indicator is off.
7) The product designs with the unique Smart Link function.
Once the linkage process is complete, you don’t have to re-link
the keyboard and the keypad even if you change batteries or
restart the computer.
8) If the keyboard or the keypad does not link with the receiver,
please repeat Step 2~3 or Step 4~5.
9) The 2.4GHz product features with 4 channels and there are 256
changeable IDs for each channel. If the selected channel or ID
is interfered by other wireless-keyboard users nearby, please
change the Link ID by re-linkage the device immediately. The
channel and the ID will automatically change.
Notification
l This equipment is intended for use in the following countries.
18 European Countries:
Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland,
Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain,
Sweden, Switzerland and United Kingdom.
l The low-battery LED indicator will light while the keyboard or the keypad
is in the status of low battery. Please change the batteries immediately.
l If the product is malfunction, please change the batteries or move the
receiver away from the computer and the monitor at least 20 cm.
l If the keyboard does not work properly, please make sure the USB port
of the computer is valid.
l Please avoid using the devices under direct sunlight, extreme hot, cold
or dusty environment.