User's Manual

- If you are running Windows 98 and plug the connector into the computer, you may find a pop-up
window that requires to insert the Windows 98 CD-ROM. Please follow the window instruction to
install the required driver or set the driver path as "Windows\system" or the other path that the
driver located.
Install the Receiver with PS/2 Connectors
1) Please turn off your PC.
2) Plug the mouse PS/2 connector on the receiver into the PS/2 mouse port of the
PC.
3) Plug the keyboard PS/2 connector on the receiver into the PS/2 keyboard port of
the PC.
Install the Receiver with USB Connector
1) You may only connect the USB connector of the receiver to the PC without
plugging the mouse PS/2 connector.
Install the Receiver with PS/2 (Mouse) and UP (Keyboard) Connectors
1) Please turn off your PC.
2) Plug the mouse PS/2 connector on the receiver into the PS/2 mouse port of the
PC.
3) Connect the USB-to-PS/2 adapter with the keyboard USB connector of the
receiver. Plug the adapter into the keyboard PS/2 port of the PC.
Select the Keyboard Channel
Note:
- Please skip this section if the
keyboard is the one-channel version.
- The keyboard shape may be different
from the keyboard diagram.
1) The two-channel switch is located on
the back of the keyboard. Select
Channel "1" or "2".
2) Put the batteries into the battery case.
Select the Mouse Channel
Note:
- Please skip this section if the mouse is the one-channel version.
- The mouse shape may be different from the mouse diagram.
1) The two-channel switch is located at the back of the mouse. Select Channel "1" or "2".
2) Put the batteries into the battery case.
Link the Wireless Keyboard and the
Wireless Mouse with the Receiver
Note:
- Please link the keyboard and the
mouse within the effective
distance.
- The linkage period is 15 seconds.
Once press the receiver's Link
Button, please complete the keyboard or the mouse linkage process
within the linage period.
- The receiver shape may be different from the receiver diagram.
1) Please turn on your PC. The LED indicator on the receiver will light.
2) Press the ID Link Button on the receiver and the LED indicator will blink. There are 15 seconds
Install the Receiver with PS/2 (Mouse) and USB (Keyboard) Connectors
1) Please turn off your PC.
2) Plug the mouse PS/2 connector on
3) Plug the keyboard USB connector on the receiver into the USB port of the PC.
Link Button
Battery Case
80.0000
35.0000
CH
1
2
Keyboard
1
2
CH
Link Button
Mouse
CH1 CH2
Receiver
Link Button
LED Indicator
Keyboard
Mouse
Keyboard
Mouse
Keyboard Mou
s
(Not Connected)
Keyboard
Mouse