Lighting Facts
Chicago Brick Oven
750 Hybrid Lighting Facts & Label information
VI. Hearth Burner Lighting Instructions
READ INSTRUCTIONS BEFORE LIGHTING
1. Set main gas supply cock in “OFF” position.
2. Turn main electrical supply “OFF.”
3. Wait at least (5) five minutes.
4. Set temperature control to desired settings
5. Place ambiance burner “ON/OFF” switch in
“OFF” position.
6. Set main gas supply cock in “ON” position.
7. Turn main electrical supply “ON.”
8. Place main “ON/OFF” switch in “ON” position.
9. If burner does not light, repeat steps 1-8.
VII. Ambient Burner Lighting
Instructions
Note: The hearth burner system must be ON as controlled by the
thermostat.
Place ambient burner ON/OFF switch in “ON” position.
VIII. Shutting Down Instructions
To shut down the burner control systems for a period
of time, turn “OFF” the main electrical supply and place
the main panel ON/OFF switch and ambiance burner
circuit ON/OFF switch to the “OFF” position.
To shut down the burner control systems for longer than
a week, turn “OFF” and “LOCK OUT” the main electrical
supply to the burner systems and turn “OFF” and “LOCK
OUT” the incoming gas supply gas cock.