Specifications

SECTION 12 –
MISCELLANEOUS
12-6
Automatic Mode - Entry Step
Switch ON
(Step Operates with Door)
With the Step switch in the ON position, the
step is in Automatic Mode. This means it will
extend and retract automatically whenever the
screen door is opened or closed.
Stationary Extended Mode - Step
Switch OFF
(Step Remains Extended)
With the Step power switch in the OFF
position, the step will extend when the screen
door is opened and will stay extended whether
the door is opened or closed.
This position is normally used to keep the step
extended when parked at a campsite or whenever
people will be going in and out the vehicle
frequently.
Automatic Retraction Feature
The step is equipped with an automatic
retraction feature that stores the step
automatically if the main entry door is closed and
the Ignition Switch key is turned to the On or Run
positions.
The step WILL RETRACT even if the Step
switch is OFF.
This feature is intended to prevent injury or
damage by an extended step while the vehicle is
moving.
Further Information
For additional information on the step, see the
manufacturer’s operators manual included in
your InfoCase.
WINDOWS
Crank-Out Windows
• Turn the crank-out handle from the horizontal
position to the vertical position.
• Pull out the lever on the crank-out handle and
begin cranking out the window counter-
clockwise to desired position.
• To close, crank the window in snugly (by
turning the crank-out handle clockwise), then
back off 1/4 turn to help avoid glass warping,
which can result in wind noise.
• Push the lever back in on the crank-out handle
and lay back in the horizontal position.
Red Activation Lever
• The red Activation Lever located on the entry
step switch must be depressed in order to put
the step switch in the ON position.