Operating instructions

Page 8 For technical questions, please call 1-800-444-3353. SKU 90287
Sharpening Troubleshooting:8.
If the tip of the bit is turning blue, it is a.
overheating. Reduce the amount of
pressure and sharpening time. Cool bit
in water between sharpening.
If one edge is longer than the other, b.
and the point is not centered, sharpen
the shorter side for a little less time. To
prevent this from happening, sharpen
both sides the same amount of time,
using the same amount of pressure.
If you are sharpening a broken (rather c.
than a dull bit) and the time required to


grinder.
CAUTION9. : Do not touch the end of the
bit after it is sharpened. The bit will
become hot!
Repeat the above steps to the other side 10.
of the bit. Sharpen both sides the same
amount of time, using the same amount
of pressure.
Repeat the above steps as necessary to 11.
sharpen bit.
Adjusting the Grinding Wheel
1.
right to raise the wheel. This will give you
an aggressive cutting action. This is also
useful when you are working with short
bits.
2.
the left. This is desirable when you wish

longer and require more repetitions.