TORNADO INDUSTRIES 7401 W. LAWRENCE AVENUE CHICAGO, IL 60706 (708) 867-5100 FAX (708) 867-6968 www.tornadovac.com Tornado â Operation & Maintenance Manual For Commercial Use Only The DS Series of 175 RPM Floor Maintenance Machines MODEL NOS. 97580, 97580C, 97585 & 97585C (115V, 60Hz) 97581 & 97586 (230V, 50Hz) L7580AD 03/01 ã2001 Tornado All rights reserved.
NOTES 2
This instruction book covers: CATALOG NO. SERIES SIZE 97580 D 17” (43cm) Steel base 97580C A 17” (43cm) Steel base 1-1/2 115V 6 Optional 1-1/2 115V 6 Optional 97581 D 17” (43cm) Steel base 1-1/2 230V 3 Optional * ** CE pending 97585 D 20” (51cm) Steel base 97585C A 20” (51cm) Steel base 1-1/2 115V 7 Optional 1-1/2 115V 7 Optional 97586 D 20” (51cm) Steel base 1-1/2 230V 3.5 Optional * ** CE pending HORSE POWER VOLTS AMPS MANUAL SOLUTION TANK CERTIFICATION CATALOG NO.
TABLE OF CONTENTS: Warranty Instructions…………………………….. 4 Safety Instructions…………………………………5 Grounding Instructions…………………………… 6 General Instructions……………………………… 7 1-1/2 HP Base Exploded View………………… 10 1-1/2 HP Base Parts List………………………..11 Handle Exploded View…………………………. 12 Handle Parts List…………………………………13 Handle Exploded View (Canada)………………14 Handle Parts List (Canada)……………………. 15 Optional Attachments & Wiring Diagrams…….
IMPORTANT SAFETY INSTRUCTIONS FOR COMMERCIAL USE WHEN USING AN ELECTRICAL APPLIANCE, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY: Do not leave machine unattended when plugged in. Unplug from outlet when not in use and before changing pads or attempting any maintenance or adjustment.
GROUNDING INSTRUCTIONS This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk electric shock. This machine is equipped with a cord having an equipment -grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
WHEN THE MACHINE IS DELIVERED Check the carton carefully for signs of rough handling. Remove the machine from the carton and look for concealed damage. If the machine is damaged, notify the carrier immediately and request an inspection. Be sure to keep the carton, packing inserts, packing lists, and carrier’s receipt until the inspector has verified your claim. BEFORE OPERATING THE MACHINE Read the manual carefully and completely before attempting to operate the unit.
• • • You must be trained in the operation of this machine before use. Please read this manual carefully and obtain operation instructions from your safety director or your authorized Tornado distributor. Always operate this machine with all of the cable removed from the handle. Failure to do so will upset the precision balance of the machine. • Care should be taken to keep cable away from rotating brush. • Do not attempt to repair warranted machines.
ATTACHING BRUSH OR PAD HOLDER • Be sure cable is not plugged into wall outlet. To attach brush or pad holder, raise handle to upright position and tighten the handle tube clamp lever. Tilt machine back on wheels until handle rests on floor. Rotate brush or pad holder against coupler until the three lugs drop into place and turn counterclockwise until locked. To remove, turn clockwise until lugs of coupler are free and then lift off. For long life and best results always use genuine Tornado accessories.
DS SERIES 1-1/2 HP FLOOR MACHINES 97580, 97580C, 97581, 97585, 97585C & 97586 BASE ASSEMBLY ITEM NO PART NO 1 2 3 4 5 6 7 8 9 10 11 * 12 13 14 15 16 17 18 19 20 21 22 01577 02109 03470 03658 04054 07719 07723 12554 16581 17617 17620 17621 18593 19335 19337 19339 19347 19364 19447 19448 19449 19450 31034 * 23 24 * (25) * 31035 30817 30836 30835 11094 18578 DESCRIPTION WASHER LOCK 5/16 SCREW HEX HEAD CAP 5/16 -18 X ¾ RING RETAINING EXT. WASHER-PLAIN .
DS MACHINES EXPLODED VIEW 97580, 97581, 97585 & 97586 HANDLE ASSEMBLY 12
DS SERIES FLOOR MACHINES 97580 & 97585 (115V), 97581 & 97586 (230V) HANDLE ASSEMBLY ITEM NO PART NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 * 38 39 40 (42) (43) (44) (45) (46) 00067 00685 01477 01574 01589 01608 01713 03361 03660 03868 06685 07525 07526 07532 07533 07534 07536 07547 10398 10407 10894 12047 14545 15226 16170 17157 17162 17163 17165 17167 17245 17900 18969 18991 18996 19211 19462 19458 19615 19651 30859 14413 31271 17154 06824 308
DS MACHINES EXPLODED VIEW 97580C & 97585C HANDLE ASSEMBLY 14
DS SERIES FLOOR MACHINES 97580C & 97585C (115V) HANDLE ASSEMBLY ITEM NO PART NO DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 (45) (46) (47) (48) (49) (50) 00067 00685 01477 01574 01589 01608 01713 02958 03361 03660 03868 06685 07525 07526 07532 07533 07534 07536 07547 10398 10407 10894 12047 14545 15195 15226 16170 16924 17157 17162 17163 17165 17167 17245 17900 18969 18991 18996 19211 19462 19615 19651 30859 31206 14
Common Options and Attachments For the DS Series of Floor Machines Part No. Description 97790 94300 98619 98118 94717 98620 98538 94917 4.5 Gallon Solution Tank Brush Yoke Only 17” Pad Holder 17” Poly. Scrub Brush 17” Nylon Shampoo Brush 20” Pad Holder 20” Poly.