Owner`s manual

Page 8 For technical questions, please call 1-888-866-5797. Item 97626
SAFETY OPERATION MAINTENANCESETUP
Grounding
TO PREVENT ELECTRIC SHOCK AND DEATH FROM
INCORRECT GROUNDING WIRE CONNECTION:
Check with a qualified electrician if you are in doubt as to whether
the outlet is properly grounded. Do not modify the power cord plug
provided with the tool. Do not use the tool if the power cord or plug is
damaged. If damaged, have it repaired by a service facility before use. If
the plug will not fit the outlet, have a proper outlet installed by a
qualified electrician.
Figure A: Outlets for 2-Prong Plug
This tool’s power adapter may
be used in either of the 120 volt
outlets shown in the preceding
illustration. (See Figure A.)
Extension Cords
Note: Extension cords must not be used with this item’s power adapter.
Symbology
Table A: Symbology
Double Insulated
Canadian Standards
Association
Underwriters
Laboratories, Inc.
V~
Volts Alternating Current
A
Amperes
n
0
xxxx/
min.
No Load Revolutions
per Minute (RPM)
Table A: Symbology
WARNING marking
concerning Risk of Eye Injury.
Wear ANSI-approved safety
goggles with side shields.
Read the manual before
set-up and/or use.
WARNING marking
concerning Risk of Fire.
Do not cover
ventilation ducts.
WARNING marking
concerning Risk of
Electric Shock.
Maintain Power cord properly.