Specification Sheet

1006-ABCP
Angle Service Stop Fitting with Supply Tube
ARCHITECT/ENGINEER SPECIFICATION
Chicago Faucets No. 1006-ABCP, Polished chrome plated solid brass body and spout. ECAST
™
construction with less than
0.25% lead content by weighted average. 2 1/4" loose key handle, loose key cap and plug button. Slow compression renewable
cartridge that closes with water with square tapered broach feature to help facilitate handle removal. 1/2" x 12" flexible supply riser.
1/2" NPT female inlet. This product is tested and certified to industry standards: ASME A112.18.1, NSF 61, Sec. 9, CSA B125
and California Lead Plumbing Law (AB1953).
"
[37mm]
1-7/16
"
[57mm]
2-1/4
1/2" [12.7mm] O.D.
x 12" [305mm] LG.
NOMINAL FLEXIBLE
SUPPLY RISER
"
[57mm]
2-1/4
"
[89mm]
3-1/2
" DIA.
[64mm]
2-1/2
"
[13mm]
1/2
1/2" NPT FEMALE
THREAD INLET
10/08 Product specifications subject to change without notice.
2100 South Clearwater Drive
Des Plaines, IL 60018
P: 847/803-5000
F: 847/803-5454
Technical: 800/TEC-TRUE
www.chicagofaucets.com
C US
®
OPERATION AND MAINTENANCE
Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation, remove
spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning this product. Do not
use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm water for cleaning and
protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the installation instructions and repair
parts documents that are located at www.chicagofaucets.com
.
ECAST,
™
from Chicago Faucets, is the line of durable, high quality brass faucets and fixtures that are designed and manufactured with
less than one quarter of one percent (0.25%) total lead content by weighted average. These products are intended for installation
where state laws and local codes mandate lead content levels or in any location where lead content is a concern.