Specification Sheet

ManualsBrandsChicago Faucets ManualsShop All Chicago FaucetsChicago Faucets Angle Stop Fitting with Loose Key and Quaturn Operating Cartridge

Job Name ________________________________________________

Item Number _____________________________________________

Section/Tag ______________________________________________

Model Specified ___________________________________________

Architect _________________________________________________

Engineer _________________________________________________

Contractor ________________________________________________

[ ] Submitted as Shown [ ] Submitted with Variations

Date _____________________________________________________

MECHANICAL FAUCETS

1025-ABCP

Stops and Supplies

Product Type

___________________________________________________

Angle Stop Fitting with Loose Key

Features & Specifications

___________________________________________________

• Stops with 5/8" Inlet

• 2-1/4" Tee Handle

• Slow Compression Operating Cartridge

• 5/8" O.D. Compression Inlet

• 3/8" O.D. Female Compression Outlet

• Slip Wall Flange

• ECAST® design provides durable brass construction with

total lead content equal to or less than 0.25% by weighted

average

• CFNow! Item Ships in 5 Days

Performance Specification

___________________________________________________

• Rated Operating Pressure: 20-125 PSI

• Rated Operating Temperature: 40-140ºF

Warranty

___________________________________________________

• Lifetime Limited Faucet Warranty

• 5-Year Limited Cartridge Warranty

• 1-Year Limited Finish Warranty

Codes & Standards

___________________________________________________

• ASME A112.18.1/CSA B125.1

• Certified to NSF/ANSI 61, Section 9 by CSA

• California Health and Safety Code 116875 (AB1953-2006)

• Vermont Bill S.152

• NSF/ANSI 372 Low Lead Content

ECAST products are intended for installation where state laws and local

codes mandate lead content levels or in any location where lead content

is a concern.

Last Revision: 08/12/2011 • Date Printed: 06/4/2013 • Product specifications subject to change without notice

2100 South Clearwater Drive

Des Plaines, IL

P: 847/803-5000

F: 847/803-5454

Technical: 800/TEC-TRUE

www.chicagofaucets.com

Summary of content (2 pages)

PAGE 1
MECHANICAL FAUCETS 1025-ABCP Stops and Supplies Product Type ___________________________________________________ Angle Stop Fitting with Loose Key Job Name ________________________________________________ Features & Specifications ___________________________________________________ • Stops with 5/8" Inlet • 2-1/4" Tee Handle • Slow Compression Operating Cartridge • 5/8" O.D. Compression Inlet • 3/8" O.D.
PAGE 2
1025-ABCP Stops and Supplies Architect/Engineer Specification ________________________________________________________________________________________________________ Chicago Faucets No. 1025-ABCP, Angle Stop Fitting with Loose Key, Chrome Plated solid brass construction. 2-1/4" Metal Tee handle(s) with Tapered Square. Slow compression rebuildable cartridge, opens and closes 360° for fine adjustment, closes with water pressure, features square tapered stem. 5/8" O.D. Compression Inlet. 3/8" O.D.