Specification Sheet

333-336COLDABCP

Sink Faucets

Architect/Engineer Specification

________________________________________________________________________________________________________

Chicago Faucets No. 333-336COLDABCP polished chrome plated solid brass construction. 3 3/8" center to center integral cast

brass spout. 2.2 GPM (8.3 L/min) pressure compensating Softflo aerator. 2 13/16" metal push-tilt handle(s) with twenty point

broach and c index. Naiad™ rebuildable auto-timed metering cartridge, adjustable run time from 2 to 15 seconds, opens with push,

0.25 gaL/cycle. Integral inlet shank(s) contains standard 1/2" NPSM supply inlet with coupling nut for 3/8" or 1/2" flexible riser. 3

3/8" center to center integral cast brass spout. Mounting hardware included. ECAST® construction with less than 0.25% lead

content by weighted average. This product meets ADA ANSI/ICC A117.1 requirements and is tested and certified to industry

standards: ASME A112.18.1M, CSA B125.1, California Health and Safety Code 116875 (AB1953-2006), and Vermont Bill S.152.

Operation and Maintenance

________________________________________________________________________________________________________

Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation,

remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the

product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm

water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the

installation instructions and repair parts documents that are located at www.chicagofaucets.com.

Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,

offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.

Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.

Last Revision: 07/25/2011 • Date Printed: 08/2/2011 • Product specifications subject to change without notice

2100 South Clearwater Drive

Des Plaines, IL

P: 847/803-5000

F: 847/803-5454

Technical: 800/TEC-TRUE