Installation Sheet

Overview
Chicago Faucets deck mounted faucets feature cast brass bodies and precision cartridges for years of
reliable operation.
Notice to the Installer
• Read this entire instruction sheet before installing to ensure proper installation.
• Installation must comply with local codes and ordinances.
• 420-T45 Series products have a maximum outlet temperature of 113°F (45°C), which may exceed the
maximum temperature requirements of some plumbing codes.
Pressurized plumbing fixtures shall be installed in accordance with manufacturer’s recommendations.
The supply piping to these devices shall be securely anchored to the building structure to prevent installed
device from unnecessary movement when operated by the user. Care shall be exercised when installing
the device to prevent marring the exposed surface.
NOTE: The information in this manual is subject to change without notice.
Please leave this manual with the facility manager after completing the faucet installation. This document
contains information necessary for routine maintenance and servicing.
NOTE: Before installation, turn off water supplies to existing faucet and remove faucet if replacing.
Clean faucet basin and clear away debris. Flush all supply lines before connecting to faucet.
Failure to do so can result in debris clogging the inlets and/or cartridges.
NOTE: Before installing a new ceramic cartridge flush lines completely.
NOTE: Faucet must be serviced using only a Chicago Faucets recommended replacement outlet.
Single Control Lavatory Faucet
Installation Instructions
Recommended for base fittings: 420 Series and 420-T Series
Installation Instructions
Temperature
Adjustment Ring
Aro de regulación
de temperatura
Anneau de réglage
de température
Set Screw
Tornillo de fijación
Vis pression
1. Position gasket and
faucet.
2. Secure faucet. 4. Remove outlet and
flush lines.
Temperature
Adjustment Ring
Aro de regulación
de temperatura
Anneau de réglage
de température
Set Screw
Tornillo de fijación
Vis pression
Temperature
Adjustment Ring
Aro de regulación
de temperatura
Anneau de réglage
de température
Set Screw
Tornillo de fijación
Vis pression
3. Attach supply lines.
Temperature
Adjustment Ring
Aro de regulación
de temperatura
Anneau de réglage
de température
Set Screw
Tornillo de fijación
Vis pression
5. Reinstall outlet.
Temperature
Adjustment Ring
Aro de regulación
de temperatura
Anneau de réglage
de température
Set Screw
Tornillo de fijación
Vis pression
Temperature
Adjustment Ring
Aro de regulación
de temperatura
Anneau de réglage
de température
Set Screw
Tornillo de fijación
Vis pression
Above Deck
Below Deck
Waste Fitting (420 Series Only)
Waste Fitting
420-T products are ASSE 1070
certified to provide anti-scald
safety measures.
For additional technical assistance, call 800/TEC-TRUE (800-832-8783) or visit our website at chicagofaucets.com.
1