Specification Sheet

732-OHCP
Angle Urinal Valve
ARCHITECT/ENGINEER SPECIFICATION
Chicago Faucets No. 732-OHCP, Polished chrome plated solid brass body. Long bonnet non-sag oscillating handle. NAIAD
™
adjustable slo-closing cartridge. 1/2" NPT female inlet and 3/4" OD x 7" tailpiece. Escutcheon deck assembly and loose wall
flange. This product is tested and certified to industry standards: ASME A112.18.1 and CSA B125.
"
[216mm]
8-1/2
" [19mm] O.D.3/4
"
DIA.
[64mm]
2-1/2
"
[25mm]
1
"
[13mm]
1/2
"
[178mm]
7
"
[48mm]
1-7/8
1/2" NPT FEMALE
THREAD INLET
2-1/2" [64mm]
DIA. FLANGE
9/08 Product specifications subject to change without notice.
2100 South Clearwater Drive
Des Plaines, IL 60018
P: 847/803-5000
F: 847/803-5454
Technical: 800/TEC-TRUE
www.chicagofaucets.com
C US
®
OPERATION AND MAINTENANCE
Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation, remove
spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning this product. Do not
use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm water for cleaning and
protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the installation instructions and repair
parts documents that are located at www.chicagofaucets.com
.
Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States, offering
a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.