Specifications

2015/03 – Subject to change
3
è Internet: www.festo.com/catalog/...
Valve terminals MPA-L
Key features
Reduced downtimes:
LED switching status display
Reliable operation:
Non-detenting/detenting or covered manual override
Width 10 mm, 14 mm and 20 mm
Safe:
Operating voltage connection,
outputs and valves can each be
switched off separately
Space-saving:
Slim valves and flat plate silencers
Flexible:
32 valve positions/32 solenoid coils
Practical:
Pre-assembled QS cartridge fittings
Quick mounting:
Directly using screws or on an H-rail
CPX diagnostic interface for
handheld devices
Pneumatic interface to CPX
Simple electrical connections
– Multi-pin plug, fieldbus connections
– Control block, CPX
– I-Port interface/IO-Link
Modular:
Pressure zone creation, additional
exhaust and supply ports possible using
supply module
Adaptable:
Selector in the end plate for defining
the pilot air supply (internal or external)
Equipment options
Valve functions
 5/2-way valve, single solenoid
 5/2-way valve, double solenoid
 2x 3/2-way valve,
normally open
 2x 3/2-way valve,
normally closed
 2x 3/2-way valve,
1x normally open,
1x normally closed
 5/3-way valve,
mid-position pressurised
 5/3-way valve,
mid-position closed
 5/3-way valve,
mid-position exhausted
 2x 2/2-way valve,
1x normally closed,
1x normally closed, reversible
 2x 2/2-way valve,
normally closed
 1x 3/2-way valve,
normally closed,
external compressed air supply
 1x 3/2-way valve,
normally open,
external compressed air supply
 Manual pressure regulators
All valves have the same compact
dimensions with an overall length of
107 mm and a height of 55 mm.
Special features
 Max. 32 valve positions/max.
32 solenoid coils
 Parallel, modular valve linking
 Electrical interlinking with
integrated holding current
reduction
 Any compressed air supply
(max. 8 supply modules)
 Creation of pressure zones
 Modular, individually extendable
tie rods
 Single valves or combinations of
four valves
 Tubing size at each connection
freely selectable
Valve terminal selection Online via: è www.festo.com
Valve terminal configurator 2D/3D CAD data
The appropriate MPA-L valve terminal
can be chosen quickly and easily
using the online catalogue. This
includes a convenient valve terminal
configurator, which makes it much
simpler to order the right product.
The valve terminals are fully
assembled according to your order
specification and are individually
tested. This reduces assembly and
installation time to a minimum.
You order a valve terminal MPA-L
using the order code.
Ordering system for MPA-L
è Internet: mpal
Ordering system for CPX
è Internet: cpx
Ordering system for CTEU
è Internet: cteu
You can request the CAD data for a
valve terminal you have configured. To
do so, start the product search as
described above. Go to the shopping
basket and click on the CAD icon
(compass). On the next page you can
generate a 3D preview or request
another data format of your choice by
e-mail.