Operating instructions

SKU 98357 For technical questions, please call 1-800-444-3353. Page 10
Troubleshooting
Problem Possible Causes Likely Solutions
Stud does not
Weld, weld Area is
Cold
1.
metal surface with Electrode
Assembly
No power to line cord2.
Stud Welder Circuit Breaker 3.
Open
Clean metal surface for the entire Electrode 1.
Assembly (26) to contact fully, press harder,
and ensure Electrode Assembly (26)
contacts the surface evenly
Check Power Source2.
3.
Weak weld, stud
does not hold
1.
Electrode or Stud dirty2.
Weld surface not cleaned 3.
down to bare metal
Hold trigger longer1.
Clean or replace both2.
Clean surface to the metal3.
Weld is burning
through metal
Weld time is too long1.
Using incorrect Stud2.
Shorten weld time1.
2.
clean the electrode
Circuit breaker
continues to trip
Circuit rating not large enough
1.
Electrical fault in Welder2.
Connect to 20 A dedicated circuit1.
2.
MAINTENANCE AND
SERVICING
Procedures not specically
explained in this manual
must be performed only by a
qualied technician.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Release the Trigger and
unplug the tool from its
electrical outlet before
performing any inspection,
maintenance, or cleaning
procedures.
TO PREVENT SERIOUS
INJURY FROM TOOL
FAILURE:
Do not use damaged
equipment. If abnormal noise
or vibration occurs, have the
problem corrected before
further use.
Cleaning, Maintenance, and
Lubrication
BEFORE EACH USE,1. inspect the
general condition of the tool. Check
for loose screws, misalignment or
binding of moving parts, cracked or
broken parts, damaged electrical
wiring, and any other condition that
may affect its safe operation.
Periodically inspect the power cord 2.

Clean the unit using a damp cloth. 3.
Never use solvents.
Keep the 4. Electrode Assembly (26)

steel wool.
5.
