Full Product Manual
Check package for the complete set of parts.
Install brackets as wall or ceiling mount according to your preference.
Wall mount Ceiling mount
wall anchor 4 x
screws 4 x
brackets 2 x
OR
For Cordless Roller Shade
2.4.2.2
"Place the front groove on the top of head rail into the bracket (as shown below).
Then push in order to clip the rear head rail groove into the bracket."
Remove the plasc tape and raise the shade up and down
straight by holding the boom handle.
Do not remove the plasc tape
before install.
!
Make sure the brackets are level.
4