Installation Guide

Wall Mount
Wall Mount
INSTALLATION
1
Measuring
3
Mount Headrails to the ceiling
2
Install Ceiling Mounts Brackets to ceiling
SNAP-N’-GLIDE
CORDLESS ROLLER SHADE
PREPARATION
1
Check the Hardware
2
Gather other necessary tools
A
B
Head Rail x 1
MountingBracket
23”-39” = 2
48 x 72 = 3
Screw
23”-39” = 4
48 x 72 = 6
C
Anchor
23”-39” = 4
48 x 72 = 6
D
Mark where the Mounting Brackets should be installed.
2 Mounting Brackets should be positioned 4 inches from the left and right edges of the blinds. Use a
steel tape measure and a level to ensure accuracy.
4in
4in
4in
4in
Wall Mount
B
Drill 2 screws for each Mounting brackets to the wall or ceiling.
C
C C
OR
Ceiling Mount
Ceiling Mount
Ceiling Mount
OR
C
C
Place the back groove of the headrail into the back mounting bracket (facing the window). Then push the back
headrail in and push the front headrail(facing you) upward until the front groove to clip into the mounting bracket.
A
B
B
B
B
B
B
B
B
B