Instructions / Assembly

CORDLESS 1-INCH
VINYL MINI BLIND
INSTRUCTIONS
PREPARATION
1
Check the Hardware
B
C
Spacer x 1
Wand x 1
Screw
23” - 36” = 4
39” - 58” = 6
70” - 72” = 8
23” - 36” = 2
39” - 58” = 3
70” - 72” = 4
23” - 36” = 2
39” - 58” = 3
70” - 72” = 4
D
A
Vinyl Blind x 1
2
Gather other necessary tools
E
Mounting Bracket
F
Tilter x 1
E
A
Click
E
A
E
D
Attach the brackets with the screws
provided and tighten the screws in place.
Use the provided spacers when attaching
the brackets to the ceiling or when the depth
of the recess exceeds 1-1/2 inches.
Insert the top front of the
head rail into the front
lip of the brackets . Push
the rail into place.
Attach the brackets with the screws
provided and tighten the screws in place.
Marking Holes
Mark the screw holes at the back
or top of the bracket .
INSTALLATION | OUTSIDE MOUNT
INSTALLATION | INSIDE MOUNT
Installing Brackets
When mounting brackets on wall board
or plaster, use the anchors.
Inserting
Use the spacers when
mounting to the ceiling.
The spacer provides the minimum
required space above the mounting
bracket to install the headrail of the
shade.
Marking Holes
Mark the screws holes at the
back or top of the bracket .
For wider widths and added
support, install the center
support bracket when provided.
Install at approximate center of
the headrail.
Installing Brackets
When mounting brackets on wall board
or plaster, use the anchors.
Inserting
Insert the top front of the
head rail into the front
lip of the brackets .
Push the head rail into
place.
Pre-drill holes for mounting
screws.
Pre-drill holes for mounting
screws and use level at top of
brackets to ensure straight
alignment.
NOTE
E
E
E
D
A
E
E
E
E
D
C
E
D
B
A
E
E
A
Click
E
A
321
321