Installation Guide

Install brackets as wall or ceiling mount according to your preference.
Cordless Zebra Shade
Install Instruction
wall anchor
20in - 45in – 4x
46in - 58in – 6x
59in - 72in – 8x
zebra shade 1x
screws
20in - 45in – 4x
46in - 58in – 6x
59in - 72in – 8x
brackets
20in - 45in – 2x
46in - 58in – 3x
59in - 72in – 4x
li handle 1x
Place the front groove of the headrail into the bracket (as shown below).
Then push the headrail in and cause the rear groove to clip into the bracket.
Keep the shade straight and easily raise it up and down by holding the boom handle.
4
Check package for the complete set of parts.
Wall mount Ceiling mount
OR
Make sure the brackets are level.
1.0.0.1

Summary of content (2 pages)