User's Manual

ManualsBrandsChicony Electronics ManualsComputers & AccessoriesWireless Keyboard

Wireless Keyboard/Mouse/Dongle

Users Manual

Getting Started

Thank you for choosing this 2.4G Wireless keyboard, Mouse and Dongle Kits. It operates with digital radio

technology to ensure no hinder communication between the keyboard, the mouse and your computer without

connecting cable.

The transmission and receiving of keyboard and mouse are free from angle restriction.

Package Content

1 x Keyboard (KG-1177)

1 x Mouse (MG-0975 Optical Mouse for worldwide except Japan)

1 x Mouse (MG-1178 Laser Mouse for Japan only)

1 x Dongle (RG-1179)

4 x AAA Batteries

Features

• Complies with Directive 1995/5/EC of the European Parliament and Commission.

• Complies with the mutual recognition of conformity 1999 for radio and telecommunications Equipment.

• Manufactured with environmental friendly recycled materials.

• Fully compliant with original USB version 2.0.

Product Specification

1. Dimension

Keyboard : 380 (L) x 143(W) x 27 (H) mm (±0.3mm)

Mouse:

101 (L) x 58 (W) x 40 (H)mm (±0.3mm)

Dongle: 33.7(L) x 17.89 (W) x 10.1(H) mm (±0.3mm)

2. Weight

Keyboard : 605 +/- 10g

(without batteries)

Mouse: 64g ± 5g (without batteries)

Dongle: 3g ± 1g

3. Frequency Range: 2.403 GHz ~ 2.480 GHz

4. Input Voltage / current:

Keyboard: 3VDC. 30mA

Mouse: 3VDC. 50mA

Dongle 5VDC 100mA

Summary of content (5 pages)

PAGE 1
Wireless Keyboard/Mouse/Dongle Users Manual Getting Started Thank you for choosing this 2.4G Wireless keyboard, Mouse and Dongle Kits. It operates with digital radio technology to ensure no hinder communication between the keyboard, the mouse and your computer without connecting cable. The transmission and receiving of keyboard and mouse are free from angle restriction.
PAGE 2
5. Battery State: Keyboard: Battery low detect voltage: 2.2V +/- 0.1V Cut off detect voltage：2.0V +/- 0.1V Mouse: Battery low detect voltage: 2.1V +/- 0.1V Cut off detect voltage：2.0V +/- 0.1V 6. Operation Distance: 10 meter at free space 7.
PAGE 3
Preparing Keyboard, mouse and receiver Note: The distance between the keyboard, mouse and PC system should not exceed 10 M. Do not move mouse on following surface: Glass or any transparent materials Dark surface Mouse pad with too many colors Rough surface Step 1: Insert batteries (Set Power Switch is Off) The Keyboard requires two Zinc-Carbon AAA batteries.
PAGE 4
The Mouse requires two Zinc-Carbon AAA batteries. CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to instructions. Refer to"Important Battery Information" for disposal instructions. Step 2: Connection (Set Power Switch is On) [Dongle type] Turn on the Keyboard/Mouse power switch. Insert dongle into PC USB port and wait few seconds for auto device configure.
PAGE 5
Troubleshooting and Tips The keyboard does not operate following installation or is not recognized. • Make sure the batteries are not too weak. • To determine whether the keyboard, mouse or computer causes the problem test the keyboard and mouse on a second computer if possible; or test another keyboard and mouse on your current computer. If you are still unable to solve the problem, please contact your point of sale or your dealer.