2.4GHz Wireless Mouse Users Manual Model No. MG-0838 Issue: Nov.
FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to Part 15 the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Getting Started Thank you for choosing this Wireless Mouse. It operates with digital radio technology to ensure no hinder communication between the mouse and your computer without connecting cable. The transmission and receiving of mouse are free from angle restriction. There are single frequency channels for mouse to prevent malfunctions when you operate several radio transmission devices simultaneously.
Troubleshooting and tips The mouse does not operate following installation or is not recognized. . Make sure that the batteries have been inserted correctly according to the polarity and the receiver is well connected. . Check that your USB port is configured properly. . Check whether the respective channels and ID are set on the receiver and the mouse. . Make the connection between the receiver and the mouse. Press a mouse button. . Make sure the batteries are not too weak. .
