User's Manual

1 Regulatory notices for notebook and tablet
computers
This chapter provides country- and region-specic non-wireless and wireless regulatory notices and
compliance information for the computer product. Some of these notices may not apply to your product.
One or more integrated wireless devices may be installed. In some environments, the use of wireless devices
may be restricted. Such restrictions may apply onboard airplanes, in hospitals, near explosives, in hazardous
locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask for
authorization to use it before you turn it on.
Accessing regulatory labels
Regulatory labels, which provide country or regional regulatory information (for example, FCC ID), may be
physically located on the bottom of the computer, inside the battery bay (select models only), under the
removable service door (select models only), on the back of the display, or on the wireless or modem module.
Some products may also provide electronic regulatory labels (e-labels) that can be accessed through the
system BIOS.
NOTE: Electronic labels are not available on all products.
NOTE: Devices not for sale or use in the United States may not contain a FCC ID.
To view electronic regulatory labels:
1. Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup Menu”
message is displayed at the bottom of the screen.
2. Press f10 to enter Computer Setup.
3. Use a pointing device or the arrow keys to select Advanced, select Electronic Labels, and then press
enter.
4. To view an electronic label, use a pointing device or the arrow keys to select one of the listed items, and
then press OK.
NOTE: The list of available electronic label items varies depending on the computer model and
installed devices.
5. To exit Computer Setup menus without saving your changes:
Select the Exit icon in the lower-right corner of the screen, and then follow the on-screen instructions.
– or –
Use the arrow keys to select Main, select Ignore Changes and Exit, and then press enter.
Federal Communications Commission notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
Accessing regulatory labels 1