INSTALLATION INSTRUCTIONS Instrucciones de instalación Installationsanleitung Instruções de Instalação Istruzioni di installazione Installatie-instructies Instructions d´installation Heavy Duty Swivel Adapter Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description CMA351
CMA351 Installation Instructions DISCLAIMER CSAV, Inc., and its affiliated corporations and subsidiaries (collectively, "CSAV"), intend to make this manual accurate and complete. However, CSAV makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind.
Installation Instructions CMA351 LEGEND Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación Perforar Befestigungsteil lösen Bohrloch Desapertar fixador Fazer furo Allentare il fissaggio Praticare un foro Bevestigi
CMA351 Installation Instructions TOOLS REQUIRED FOR INSTALLATION 3/32" (provided) 5/32" (provided) PARTS A (1) C (2) .315 x .
Installation Instructions CMA351 Installation 5. Secure Swivel Adapter (A) to 1 ½" NPT pipe using one Set Screw (F) and hex wrench. (See Figure 2) IMPORTANT ! : The following installation procedure assumes that a 1 ½" NPT pipe has been properly installed to the ceiling. 1. Place one Nylon washer (C) over each stud on Swivel Adapter (A). (See Figure 1) 2. Align slots in stop plate (B) with two threaded studs on Swivel Adapter (A). (See Figure 1) 3.
CMA351 Installation Instructions 7. Thread one 1 1/2" NPT pipe into lower Swivel Adapter (A). (See Figure 4) 8. Secure lower 1 1/2" NPT pipe to swivel adapter (A) using one set screw (G). (See Figure 4) (E) X1 WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the installer’s responsibility to make sure the combined weight of all components located between the CMA351 up to (and including) the display/projector does not exceed 500 lbs (226.8 kg).
Installation Instructions CMA351 7
CMA351 Installation Instructions USA/International Europe Asia Pacific 8803-000010 RevA ©2007 Chief Manufacturing www.chiefmfg.com 11/07 A P F A P F A 8401 Eagle Creek Parkway, Savage, MN 55378 800.582.6480 / 952.894.6280 877.894.6918 / 952.894.6918 Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands +31 (0)40 2668620 +31 (0)40 2668615 Room 24F, Block D, Lily YinDu International Building LuoGang, BuJi Town, Shenzhen, CHINA.