INSTALLATION INSTRUCTIONS RSM Elite Series Projector Mounts RPA Elite Series Projector Mount RPA Elite Series Projector Mount RPA Elite Series Projector Mount RPA Elite Series Projector Mount RPA Elite Series Projector Mount RPA Elite Series Projector Mount RSM A-D
RSM Elite Series Projector Mounts Installation Instructions DISCLAIMER Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions RSM Elite Series Projector Mounts DIMENSIONS 57.8 2.28 BOLT CIRCLE 40.9 1.61 55.4 2.18 40.9 1.61 110.9 4.37 INTERFACE LOCKING SWITCH 5.6 .22 YAW ADJUSTMENT POINT 10 THREADS ONTO 1-1/2' NPT PITCH ADJUSTMENT POINT 15 128.7 5.07 46.4 1.83 ROLL ADJUSTMENT POINT 4 NOTE: CUSTOM INTERAFCE BRACKET NOT SHOWN. THE CUSTOM INTERFACE BRACKET NEEDED FOR YOUR PROJECTOR WILL ADD DEPTH TO INSTALLATION AND THE MOUNT. SEE SSM-XXX DRAWING ALSO.
RSM Elite Series Projector Mounts Installation Instructions LEGEND 4 Tighten Fastener Pencil Mark Serrez les fixations Marquage au crayon Serrare il fissaggio Segno a matita Befestigungsteil festziehen Stiftmarkierung Apretar elemento de fijación Marcar con lápiz Bevestiging vastdraaien Potloodmerkteken Apertar fixador Marcar com lápis Loosen Fastener Drill Hole Desserrez les fixations Percez un trou Allentare il fissaggio Praticare un foro Befestigungsteil lösen Bohrloch Aflojar e
Installation Instructions RSM Elite Series Projector Mounts LEGEND Hammer Target of Projector Martillo Punto de enfoque del proyector Hammer Ziel des Projektors Martelo Mira do projector Martello Punto di proiezione Hamer Doel van de projector Marteau Cible du projecteur TOOLS REQUIRED FOR INSTALLATION 7/16" 3/32" (wood) 1/4" (concrete) PARTS A (1) B (1) All-Points Security Kit (Optional) Example Only (Interface bracket varies dependent on projector model) 5
RSM Elite Series Projector Mounts 1 Installation Instructions RSM INSTALLATION (not included) NOTE: Models RSM-A/RSM-B/RSM-C/RSM-D are identical EXCEPT each provides a different keyed lock. Threaded Pipe Installation 1. (not included) Carefully determine required mounting location. IMPORTANT ! : This will require knowing the lens to screen distance. See projector specifications for details on determining this distance. 2 4 2. 3 Install 1-1/2" NPT or NPSM following ANSI/ASME B1.20.
Installation Instructions RSM Elite Series Projector Mounts INSTALLATION Wood Stud Installation 1a 1. Carefully determine required mounting location. IMPORTANT ! : This will require knowing the lens to screen distance. See projector specifications for details on determining this distance. WARNING: IMPROPER INSTALLATION CAN 1 RESULT IN SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! Structural members MUST be capable of supporting five times the combined weight of all equipment being mounted.
RSM Elite Series Projector Mounts Installation Instructions 1b Concrete Installation 1. Determine mounting location. WARNING: The RSM is designed to be mounted to a concrete ceiling with a minimum thickness of 8" and a maximum drywall covering of 5/8". 1 WARNING: IMPROPER INSTALLATION CAN RESULT IN SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! Structural members MUST be capable of supporting five times the combined weight of all equipment being mounted. 2.
Installation Instructions 1c RSM Elite Series Projector Mounts 1 Threaded Rod Installation 2 The RSM must be suspended from four 1/4" diameter (minimum) Grade 2 or better threaded rods (not included) which are secured to unistrut, angle or channel assembly overhead structural members (trusses or I-beams) by Grade 2 or better 1/4" channel nuts (not included).
RSM Elite Series Projector Mounts Installation Instructions Example Only (Interface bracket varies dependent on projector model) 2a WARNING: IMPROPER INSTALLATION CAN LEAD TO PROJECTOR FALLING RESULTING IN SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT. DO NOT substitute hardware. Use only the hardware provided by the manufacturer. 1 1. Secure interface bracket to mount using installation instructions and hardware provided with interface bracket.
Installation Instructions 2c RSM Elite Series Projector Mounts Securing Projector with Interface Bracket to Model RSM Mount Example Only (Interface bracket varies dependent on projector model) WARNING: IMPROPER INSTALLATION CAN LEAD TO PROJECTOR FALLING RESULTING IN SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT. Make certain mounting slots in mount base slide under thumb screws and that screws are seated in the back of slots. 1.
Installation Instructions RSM Elite Series Projector Mounts Example Only (Interface bracket varies dependent on projector model) 3 ADJUSTMENTS YAW Adjustment 1. Loosen YAW adjustment locking screw using a #2 Phillips screwdriver. 2. Turn YAW micro-adjustment screw right or left using a #2 Phillips screwdriver until image is properly aligned on target. 3. Tighten YAW adjustment locking screw using a #2 Phillips screwdriver. 3 1 2 3a Pitch Adjustment 1 3 1. Example Only (Interface bracket 2.
RSM Elite Series Projector Mounts Installation Instructions 3b Roll Adjustment 1 3 Example Only (Interface bracket varies dependent on projector model) 2 13 1. Loosen ROLL adjustment locking screw using a #2 Phillips screwdriver. 2. Turn ROLL micro-adjustment screw right or left using a #2 Phillips screwdriver until image is properly aligned on target. 3. Tighten ROLL adjustment locking screw using a #2 Phillips screwdriver.
RSM Elite Series Projector Mounts 14 Installation Instructions
Installation Instructions RSM Elite Series Projector Mounts 15
RSM Elite Series Projector Mounts Installation Instructions USA/International Europe Chief, a products division of Milestone AV Technologies 8832-002002 Rev03 2014 Milestone AV Technologies www.chiefmfg.com 05/14 Asia Pacific A P F A P F A 6436 City West Parkway, Eden Prairie, MN 55344 800.582.6480 / 952.225.6000 877.894.6918 / 952.894.6918 Franklinstraat 14, 6003 DK Weert, Netherlands +31 (0) 495 580 852 +31 (0) 495 580 845 Office No.