INSTALLATION INSTRUCTIONS Istruzioni di installazione Installatie-instructies Instructions d´installation Instrucciones de instalación Installationsanleitung Instruções de Instalação RMF2 RLF2 RXF2 Universal Fixed Mounts Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description RMF2/RLF2/RXF2
RMF2/RLF2/RXF2 Installation Instructions DISCLAIMER Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions RMF2/RLF2/RXF2 DIMENSIONS - RMF2 558.8 22.00 [449] 17.68 MAX 279.4 11.00 200 7.87 TOP MOUNTING HOLE TO CENTERLINE ARROW ON THE WALL PLATE WALL PLATE OPENING 8.7 .34 20.1 .79 (UP TO 1.54 USING SPACERS) 177.8 7.00 WALL PLATE OPENING 419.1 16.50 25.4 1.00 212.7 8.38 400 15.75 MAX ORIENTATION AND CENTERLINE NOTCHES 63.5 2.50 CENTERLINE TO BOTTOM OF WALL PLATE OPENING -KICKSTAND LANYARDS -WHEN KICKSTAND IS ACTIVATED, THE DISPLAY TILTS BACK 5 7.1 .
RMF2/RLF2/RXF2 Installation Instructions DIMENSIONS - RXF2 WALL PLATE OPENING 965.2 38.00 [965.2] 38.00 MAX 482.6 19.00 200 7.87 TOP MOUNTING HOLE TO CENTERLINE ARROW ON THE WALL PLATE 20.1 .79 (UP TO 1.54 USING SPACERS) 177.8 7.00 WALL PLATE OPENING 8.7 .34 25.4 1.00 212.7 8.38 500 19.69 MAX ORIENTATION AND CENTERLINE NOTCHES 63.5 2.50 CENTERLINE TO BOTTOM OF WALL PLATE OPENING -KICKSTAND LANYARDS -WHEN KICKSTAND IS ACTIVATED, THE DISPLAY TILTS BACK 5 7.1 .
Installation Instructions RMF2/RLF2/RXF2 LEGEND Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación Perforar Befestigungsteil lösen Bohrloch Desapertar fixador Fazer furo Allentare il fissaggio Praticare un foro B
RMF2/RLF2/RXF2 Installation Instructions TOOLS REQUIRED FOR INSTALLATION 7/32" (5.5mm) 5/16" (7.9mm) 1/2" (12.7mm) #2 PARTS B(2) [vertical bracket] A(1) [wall plate] [RLF2 shown] For below kit, quantities are 4 for RMF2 and RLF2, 6 for RXF2 F (1) Hardware Bag FA(8) M4 x 16mm FE(6) M5 x 16mm FI(6) M6 x 16mm FL(6) M8 x 20mm FP(8) 1/4"(6.4mm) C(4 or 6) 5/16 x 2 1/2" FB(6) M4 x 20mm FF(6) M5 x 20mm FJ(6) M6 x 25mm FQ(8) 1/2"(12.
Installation Instructions RMF2/RLF2/RXF2 Assembly And Installation Install Wall Plate to Wall - Wood Studs 2 x 4 or 6 WARNING: Failure to provide adequate structural strength for this component can result in serious personal injury or damage to equipment! It is the installer’s responsibility to make sure the structure to which this component is attached can support five times the combined weight of all equipment. Reinforce the structure as required before installing the component.
RMF2/RLF2/RXF2 Installation Instructions Install Wall Plate to Wall - Concrete or Concrete Block WARNING: Failure to provide adequate structural strength for this component can result in serious personal injury or damage to equipment! It is the installer’s responsibility to make sure the structure to which this component is attached can support five times the combined weight of all equipment. Reinforce the structure as required before installing the component.
Installation Instructions RMF2/RLF2/RXF2 Install Brackets to Display (non-recessed holes) WARNING: The minimum hole pattern size is 100mm x 100mm for the RMF2 and 200mm x 200mm for the RLF2 and the RXF2. 1. (FA-FO) x4,x6,x8 6 (FS) x4,x6,x8 Lay display face down on protective surface. 2 4 CAUTION: Using screws of improper diameter may damage your display! Proper screws will easily thread into display mounting holes. 2.
RMF2/RLF2/RXF2 Installation Instructions Install Display to Wall Plate (view from left side) WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the installer’s responsibility to make sure the combined weight of all components attached does not exceed 125 lbs (56.7 kg) for the RMF2 and RLF2 or 175 lbs (79.4 kg) for the RXF2.
Installation Instructions RMF2/RLF2/RXF2 (views from left side) kickstand against wall locked position 3 4 6 Figure 11 3. Unlock kickstand by pushing up on interface brackets until kickstand rests against the wall. (See Figure 11) 4. Push up on the interface brackets further in order to lock display into position against wall. (See Figure 11) 5. Straps can be tucked behind display on notch on interface brackets (B) after installation is complete so that they will not be visable to the viewer.
RMF2/RLF2/RXF2 Installation Instructions USA/International Europe Chief Manufacturing, a products division of Milestone AV Technologies 8800-002426 Rev00 2013 Milestone AV Technologies, a Duchossois Group Company www.chiefmfg.com 11/13 Asia Pacific A P F A P F A 6436 City West Parkway, Eden Prairie, MN 55344 800.582.6480 / 952.225.6000 877.894.6918 / 952.894.6918 Franklinstraat 14, 6003 DK Weert, Netherlands +31 (0) 495 580 852 +31 (0) 495 580 845 Office No.