INSTALLATION INSTRUCTIONS FCAB3X1U (shown attached to LCM3X1U) FCAB3X1UP Menu Board Back Row Add-On Kits Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description FCAB3X1U / FCAB3X1UP
FCAB3X1U / FCAB3X1UP Installation Instructions DISCLAIMER Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions FCAB3X1U / FCAB3X1UP DIMENSIONS FCAB3X1U 108.00 2743.2 DIMENSIONS: INCHES [MILLIMETERS] FCAB3X1U TILT RANGE -5° TO +20° 16.75 425.
FCAB3X1U / FCAB3X1UP Installation Instructions DIMENSIONS (cont’d) FCAB3X1U [400mm Mounting Pattern] 15.75 400.0 DIMENSIONS: INCHES [MILLIMETERS] FCAB3X1U [600mm/800mm Mounting Patterns] 23.62 600.
Installation Instructions FCAB3X1U / FCAB3X1UP DIMENSIONS (cont’d) FCAB3X1UP 68.00 1727.2 DIMENSIONS: INCHES [MILLIMETERS] FCAB3X1UP FCAB3X1U 7.02 178.
FCAB3X1U / FCAB3X1UP Installation Instructions DIMENSIONS (cont’d) FCAB3X1UP 2.04 51.7 TILT RANGE -5° TO +20° DIMENSIONS: INCHES [MILLIMETERS] FCAB3X1UP [400mm Mounting Pattern] 15.75 400.
Installation Instructions FCAB3X1U / FCAB3X1UP LEGEND Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación Perforar Befestigungsteil lösen Bohrloch Desapertar fixador Fazer furo Allentare il fissaggio Praticare un f
FCAB3X1U / FCAB3X1UP Installation Instructions TOOLS REQUIRED FOR INSTALLATION #2 1/8" (included) 3/16" (included) M5 (included) 1/2" or 13mm 3/8" PARTS [Interface Bracket Hardware Kit] (3 bags total - quantities listed per bag) *PLEASE NOTE* A (8) M4x16mm Several letters have been skipped in order E (6) to maintain M5x20mm consistency of parts lettering with parts listed in LCM3X1U_UP I (6) installation M8x20mm instructions. B (6) M4x20mm F (6) M5x25mm L (8) .750x.323x.
Installation Instructions INSTALLATION The following installation instructions assume that the UL Listed LCM3X1U or LCM3X1UP has been assembled up until the Attaching Interface Brackets to Displays section. Refer to LCM3X1U/LCM3X1UP installation instructions for details.
FCAB3X1U / FCAB3X1UP Installation Instructions Attaching Displays to Ceiling Mount Attaching Interface Brackets to Display 1. Lower the latch mechanism on all interface brackets (EE). (See Figure 5) WARNING: IMPROPER INSTALLATION CAN LEAD TO DISPLAY FALLING CAUSING SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! The weight of the displays must be evenly distributed as the displays are added to the ceiling mount.
Installation Instructions FCAB3X1U / FCAB3X1UP 4. Fasten bracket against ceiling mount extrusion using one 10-24 x 5/8" button head cap screw (T). (See Figure 9) 5. Repeat for other interface bracket. 5 4 Tilt The interface brackets allow -5° to 20° tilt, and can be locked at 0°, 10° and 20° tilt. 3. If necessary, loosen button head tilt friction bolt (located on side of interface bracket). (See Figure 11) 4. Adjust tilt as required. (See Figure 11) 5.
FCAB3X1U / FCAB3X1UP Installation Instructions USA/International Europe Chief Manufacturing, a products division of Milestone AV Technologies 8800-002383 Rev00 2013 Milestone AV Technologies, a Duchossois Group Company www.chiefmfg.com 11/13 Asia Pacific A P F A P F A 6436 City West Parkway, Eden Prairie, MN 55344 800.582.6480 / 952.225.6000 877.894.6918 / 952.894.6918 Franklinstraat 14, 6003 DK Weert, Netherlands +31 (0) 495 580 852 +31 (0) 495 580 845 Office No.
