INSTALLATION INSTRUCTIONS Dual Display Pole Mount FDP Series
FDP Series Installation Instructions DISCLAIMER Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions FDP Series DIMENSIONS [38.100 - 50.
FDP Series Installation Instructions LEGEND Tighten Fastener Phillips Screwdriver Apretar elemento de fijación Destornillador Phillips Befestigungsteil festziehen Kreuzschlitzschraubendreher Apertar fixador Chave de fendas Phillips Serrare il fissaggio Cacciavite a stella Bevestiging vastdraaien Kruiskopschroevendraaier Serrez les fixations Tournevis à pointe cruciforme By Hand Adjust A mano Ajustar Von Hand Einstellen Com a mão Ajustar A mano Regolare Met de hand Afstellen À la
Installation Instructions FDP Series FDP Bracket Assembly and Installation INSTALLATION WARNING: Failure to provide adequate structural strength for this component can result in serious personal injury or damage to equipment! It is the installer’s responsibility to make sure the structure to which this component is attached can support five times the combined weight of all equipment. Reinforce the structure as required before installing the component.
FDP Series Installation Instructions 4. Insert 1/2" x .194 x 1/2" nylon spacers (C). (See Figure 3) 5. Secure to FDP (A) using 10-24 x 1" Phillips head screws (B). (See Figure 3) Vertical Installation The FDP assembly ships configured for vertical pole mounting. 1. Horizontal Configuration Assemble two FDP bracket halves (A) and secure around pole using two 1/4-20 x 4-1/4" hex bolts (D) and two .75 x .26 x .048" spacers (E).
Installation Instructions FDP Series 3. Lift and maneuver display so that mounting buttons on interface brackets (F) fit into button openings on FDP (A). (See Figure 7) 4. Lower display firmly into place. Ensure each button has fully seated in its button opening. 5 Locked Tilt Adjustment WARNING: IMPROPER HANDLING CAN LEAD TO DISPLAY FALLING CAUSING SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! Inadequate support of display while adjusting tilt may cause display to fall! 1.
FDP Series Installation Instructions USA/International Chief, a products division of Milestone AV Technologies 8800-002565 Rev00 2014 Milestone AV Technologies www.chiefmfg.com 04/14 Europe Asia Pacific A P F A P F A 6436 City West Parkway, Eden Prairie, MN 55344 800.582.6480 / 952.225.6000 877.894.6918 / 952.894.6918 Franklinstraat 14, 6003 DK Weert, Netherlands +31 (0) 495 580 852 +31 (0) 495 580 845 Office No.
