INSTALLATION INSTRUCTIONS Single Display Pole Mount FSP Series
FSP Series Installation Instructions DISCLAIMER Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions FSP Series DIMENSIONS DIMENSIONS: [MILLIMETERS] INCHES LEGEND Tighten Fastener Phillips Screwdriver Apretar elemento de fijación Destornillador Phillips Befestigungsteil festziehen Kreuzschlitzschraubendreher Apertar fixador Chave de fendas Phillips Serrare il fissaggio Cacciavite a stella Bevestiging vastdraaien Kruiskopschroevendraaier Serrez les fixations Tournevis à pointe cruciforme By Hand Adjust A mano Ajustar Von Hand Einstellen Com a mão Ajustar A
FSP Series Installation Instructions TOOLS REQUIRED FOR INSTALLATION #2 5/32" (included) PARTS A (2) [FSP mount] B (4) (10-24 x1") C (4) (1/2" x .
Installation Instructions FSP Series FSP Mount Assembly and Installation INSTALLATION WARNING: Failure to provide adequate structural strength for this component can result in serious personal injury or damage to equipment! It is the installer’s responsibility to make sure the structure to which this component is attached can support five times the combined weight of all equipment. Reinforce the structure as required before installing the component.
FSP Series Installation Instructions 4. Insert four 1/2" x .194 x 1/2" nylon spacers (C). (See Figure 3) Vertical Installation 5. Secure tilt bracket to FSP (A) using four 10-24 x 1" Phillips head screws (B). (See Figure 3) 1. The FSP assembly ships configured for vertical pole mounting. Install the FSP (A) on 1-1/2" to 2" O.D. pipe (not included). (See Figure 5) (B) x 4 5 Note: Pole not shown for clarity Pipe (A) Figure 5 2.
Installation Instructions FSP Series Installing Display with Interface Bracket Tilt Adjustment WARNING: IMPROPER HANDLING CAN LEAD TO WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the installer’s responsibility to make sure the combined weight of all components attached to the FSP does not exceed 45 lbs (20.4 kg). 1. Install FSB interface bracket (E) to display using the instructions and hardware provided with the interface bracket kit. 2.
FSP Series Installation Instructions USA/International Chief, a products division of Milestone AV Technologies 8800-002568 Rev00 2014 Milestone AV Technologies www.chiefmfg.com 04/14 Europe Asia Pacific A P F A P F A 6436 City West Parkway, Eden Prairie, MN 55344 800.582.6480 / 952.225.6000 877.894.6918 / 952.894.6918 Franklinstraat 14, 6003 DK Weert, Netherlands +31 (0) 495 580 852 +31 (0) 495 580 845 Office No.
