User's Manual

HFSTS Installation Instructions
6
Assembly And Installation
1. Partially install six #10-24 x 5/8" button head cap screws (E)
into column (A). (See Figure 1)
Figure 1
2. Install bolt plate (C) inside column (A) channel. (See Figure
2)
3. Use four #10-24 x 1/2" flat head cap screws (F) to secure
two base plates (D) to column (A) and bolt plate (C). (See
Figure 2)
Figure 2
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components and accessories attached to mounting
system does not exceed 10 lbs (4.5 kg) for the main interface
or 18 lbs (8.1 kg) for the entire mount when used with both
compatible accessories (not included). See Figure on page 2
for details.
4. Use column-mounted tablet nut (provided with column-
mounted tablet) to install column-mounted tablet (not
included) to column. (See Figure 3)
Figure 3
1
(E) x 6
(A)
(partially install)
(D) x 2
(C)
2
(F) x 4
3
(A)
4
column-mounted
tablet nut
(not included)
column-mounted
(not included)
tablet