User's Manual

Installation Instructions HSMS
3
TOOLS/PARTS REQUIRED FOR INSTALLATION
1/8"
A (1)
[VESA-mounted Tablet accessory]
B (4)
M4 x 20mm
C (4)
M4 x 10mm
#2
D (4)
10mm
VESA-mounted Accessory Installation
1. Assemble Column-mounted Tablet Stand following
installation instructions of the stand until the column-
mounted tablet is ready to be installed to the column.
2. Use column-mounted tablet nut (provided with column-
mounted tablet) to install VESA-mounted tablet accessory
(A) and column-mounted tablet to column. (See Figure 1)
Figure 1
3. Complete installation of column-mounted tablet stand
referring to the installation instructions for the tablet stand.
VESA-mounted Tablet Installation
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components attached to accessory does not exceed 5 lbs
(2.27 kg).
IMPORTANT ! : VESA-mounted Tablet installed should
not exceed 15" in diagonal screen size.
1. Use four Phillips pan machine screws (B or C) of appropriate
length to secure standard tablet (not included) to tablet
accessory (A). (See Figure 2)
NOTE: Spacers (D) may be used for VESA-mounted tablets
with recessed mounting holes.
Figure 2
(A)
2
(rear view)
column-mounted
tablet nut
(not included)
column-mounted
(not included)
tablet
floor stand column
1
(B or C) x 4
(D) x 4
1
(for recessed
mounting holes)
(column hidden
for clarity)
(A)
VESA-mounted tablet
(not included)