User's Manual

HTSTS Installation Instructions
6
Assembly And Installation
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components and accessories attached to mounting
system does not exceed 10 lbs (4.5 kg).
1. Use column-mounted tablet nut (provided with column-
mounted tablet) to install column-mounted tablet (not
included) to column (A). (See Figure 1)
Figure 1
2. Connect cord to bottom of column-mounted tablet. (See
Figure 2)
3. Partially install four #10-24 x 5/8" button head cap screws
(C) into column cover (B). (See Figure 2)
4. Insert column cover (B) into column (A) channel and place
four screws (C) into four holes on column cover (B). (See
Figure 3)
Figure 2
5. Slide column cover (B) up until screws (C) are properly
positioned into keyholes. (See Figure 3)
6. Tighten all four screws (C) to secure column cover (B) to
column (A). (See Figure 3)
Figure 3
1
column-mounted
tablet nut
(not included)
column-mounted
(not included)
tablet
(A)
3
(C) x 4
(A)
(partially install)
2
4
5
6
(C) x 4
(tighten)
(B)
(A)